...
| hiddenfragment- |
|---|
...
| macro |
|---|
...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
The contents inside this box are only shown to members of the development team. This section can be useful to write notes down that we don’t want to show to customers.
☢️☢️ Add below the tasks to be released!☢️☢️
...
To be released in the next update:
...
Version 3.5.0
| ||
The contents inside this box are only shown to members of the development team. This section can be useful to write notes down that we don’t want to show to customers. ☢️☢️ Add below the tasks to be released!☢️☢️ To be released in the next update: |
UNI-Connect v3.8.3
Happy Valentine’s Day! Today marks a bittersweet moment for us as we bid farewell to Survey in UNI-Connect and embrace UNI-Collect, our new surveying app.
Features
feat: Refactored the sidebar menu, removing the “survey” page and prioritizing visibility for the most frequently accessed pages.
feat: Introduced a new banner in the dashboard to show the current sync status or possible errors
| Hiddenfragment macro | ||
|---|---|---|
| ||
|
Bugs
fix: fixed an issue where certain devices displayed the option to upgrade their GPS module to a lower firmware version.
fix: fixed an issue with NTRIPServer
...
Version 3.7.14
Status colour Blue title UNiconnect Added upgrade feature for GNSS devices with tilt
The new GNSS firmware improves tilt reliability
Added survey deprecation banner
Survey deprecation in UNI-Connect set to 31st of January
Fixed grid map for Belgium
Fixed some profiles settings not working at boot up.
Prevented battery reset while charging
Fixed some Canbus connection issues
Increased Canbus NMEA logs
Status colour Green title Coprocessor 2.4.6 Fixed issue with LED battery blinking red after a long time charging
Fixed issues related to battery level readings at boot up or with low battery
Version 3.6.20
Status colour Blue title UNiconnect Fixed some issues related to syncing.
Fixed “Manual install required” pop-up.
Concluded the LED keypad documentation.
Status colour Red title UNI-Radio Implemented our base station radio implementation.
Furthest fix point reached by a rover is 8.3 km.
Status colour Green title Coprocessor 2.4.3 Fixed behaviour that could cause the device to get stuck when initialising without enough battery.
Fixed behaviour when charging with the device turned off and pressing the power button consecutively. Previous versions would cause errors.
Increased reactivity time when charging. The device will now start the charging negotiation 50% faster.
Increased red battery LED to 10% for the battery level. This will make the red led more visible when the battery is low.
Improved behaviour when charging and auto start.
Increased negotiation time for usbpd to 40 seconds.
Increased minimum battery level when powering on the device to 5%. This will give the device time to update properly without interruptions.
Various small logic fixes.
Version 3.6.3
Status colour Blue title UNiconnect Implemented local NTRIP server
Version 3.6.1
Status colour Blue title UNiconnect Added Kadaster Information from WMF Germany.
Improved tilt configurations for UM981 devices.
Status colour Red title Bugs
...
Solved profiles.db/json errors.
Addressed sync error issue introduced in 3.4.21.
Solved wrong hostname in UNI-GR2s.
Improved updating mechanism. This should resolve in less corrupted updates and less roll-backs.
Solved problem with UM98x devices trying to wrongly upgrade their firmware
Version 3.4.28
Status colour Blue title UNiconnect Addressed various minor issues.
Status colour Red title Bugs Resolved an issue where new devices' serial PCB numbers were incorrectly assigning GR2 as GR1s when flashing.
Temporarily reverted the sync issue fix as it introduced unforeseen complications. A new fix will be implemented shortly.
Version 3.4.23
Status colour Blue title UNiconnect Fixed input validation to help make more sensible project settings
Improved error messages
Updated Dutch Kadaster parcel overlay to v5 (v4 phased out as of 2024)
Version 3.4.21
Status colour Blue title UNiconnect Support updating GNSS firmware of UNI-GR2 devices
Added support for tilt (Only on UNI-GR2 devices with tilt capabilities)
Status colour Red title Bugs Profile information now stored in database instead of json file to prevent corrupted profiles
Fixed sync issue errors
Status colour Green title Coprocessor Improved usbpd charging algorithm and reliability
Improved charging when autostart is turned on
Version 3.4.9
Status colour Red title Bugs Height measurement when stacking out with the latest UNI-GR2 has been fixed.
Fixed the Bluetooth issue that stopped users from having uninterrupted communication with the latest Android versions.
Version 3.4.7
Status colour Blue title UNiconnect Removed Seismic mode
New UNI-Connect features popup
Status colour Red title Bugs Input validation fix which would block certain longer layer attribute values to block syncing
Version 3.4.5
Status colour Blue title UNiconnect Added functionality to increase and decrease GNSS data reporting frequency automatically during stakeout
Further support for UNI-GR2
Removed erroneous LED lighting mode
Added support for the GR2’s improved GNSS modem to report it's firmware version
Status colour Red title Bugs Incorrect mentions of GR1 on a GR2 device have been resolved
Fixed issue where in some cases CRS' would not sync with the UNI-Cloud correctly
input validation fix where accuracy could be entered incorrectly in project settings
Version 3.4.4
Status colour Blue title UNiconnect Added support for UNI-GR2
Status colour Green title Coprocessor Added support for UNI-GR2
Refactored the charging algorithm to provide improved functionality. The battery LED now provides visual feedback to indicate the charging progress.
When connecting the UNI-GRX to a power source using a 12-pin or USB-C cable, the battery LED displays an animation that represents the charging negotiation status with the cable.
If the charging negotiation is successful, the device will begin charging and the battery LED will blink in the current battery level color. However, if the negotiation fails, the battery LED will start fast blinking red.
When the battery LED rapidly blinks red, it indicates an error with the current charging session. To ensure a successful charging session, it is advised to disconnect the cable and wait for at least 5 seconds before reconnecting the cable.Status colour Red title IMPORTANT
If the rapid red blinking persists, it suggests that the user may be utilizing an unsupported charger.Status colour Red title IMPORTANT
If the rapid red blinking persists even with a supported charger. Turn on and off the device without the usb-c cable, so that the usb-c chip can reset.Status colour Red title IMPORTANT
Status colour Red title Bugs Turned off unnecessary components when the device enters sleep mode. This optimization increases the battery life by three times when the device is not in use.
Resolved a charging issue that affected UNI-GR1 version 1 devices.
Addressed false positive charging sessions by providing more accurate feedback about the charging process.
Addressed issue where the device would not respond either after an update or after charging
...
Version 3.3.1
Status colour Yellow title SURVEY Paused survey with a window to give the users a chance to try unicollect
Status colour Green title Coprocessor Improved usb-c charging reliability
Implemented functionality to calibrate accelerometer and gyroscope
Implemented functionality to reset the battery meter
Status colour Red title Bugs Fixed charging animation in uniconnect when charging with usb-c
Fixed battery issue in UNI-GR1 version 2 devices that led to excessive discharge over night
...
Version 3.2.3
Status colour Red title Bugs Improved/decreased memory and CPU usage among several services to limit the chances of cloud delays occurring.
Status colour Green title CLOUD ADMIN Functionality for administrators to reset survey info remotely.
...
Version 3.2.0
Mar, 2023
Status colour Green title Coprocessor Release of firmware 2.2.0 for 2nd gen devices.
...
Version 3.1.20
Status colour Green title CLOUD Cloud communications method fundamental rollback.
...
Version 3.1.14
Status colour Red title Bugs Fixed an issue where some UNI-GR1 version 1 devices would not update the coprocessor firmware.
Status colour Green title Coprocessor Added missing coprocessor firmware for UNI-GR1 version 1 devices.
...
Version 3.1.12
Status colour Red title Bugs Fixed an issue where some UNI-GR1 would turn on automatically when the charger was plugged in.
Status colour Green title Coprocessor Added a small fix for the auto start functionality.
New coprocessor version 2.1.2 also released.
...
Version 3.1.10
Status colour Red title Bugs Fixed an issue where some Klic layers in UNI-Connect had Dimension lines visible by default.
Fixed an issue where polygons in Klic had no transparency in UNI-Connect.
Quality of life fixes.
Status colour Green title Coprocessor Added functionality to enable auto start in UNI-GR1 Version 2 devices
Added functionality to store some configuration settings on the coprocessor.
Status colour Green title SURVEY Added validation criteria for layer attribute names in UNI-Connect to restrict to 64 characters.
| Hiddenfragment macro | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
...
Version 3.1.0
Status colour Red title Bugs Fixed an issue where the 4G dongle would not provide internet occassionally for some devices.
Quality of life fixes.
Status colour Green title SURVEY Added HDOP/PDOP/VDOP values to the information panel in project view.
Status colour Yellow title Coprocessor Created a new coprocessor version (v2.1.0) for the UNI-GR1 Version 2.0 devices.
Added USB-PD charging for UNI-GR1 Version 2.0 devices. (Supported charger profiles: 12V/2.4A and 9V/3A). Please verify that the charger supports these profiles before using them with the devices.
...
Version 3.0.0
Status colour Red title Bugs Fixed an issue where the satellite led wouldn’t light up.
Quality of life fixes.
Status colour Yellow title Coprocessor Created a new coprocessor version (v2.0.0) for the UNI-GR1 Version 2.0 devices.
Added a new boot and rotation animation for the led ring for the UNI-GR1 Version 2.0 devices.
Added a new led animation when updating the firmware for the coprocessor for the UNI-GR1 Version 2.0 devices.
...
Version 2.9.18
Status colour Red title Bugs Fixed an issue where the 4G dongle would not provide internet at times.
Fixed an issue where the manual point import would fail when importing coordinates without any decimal values.
Quality of life fixes.
...
Version 2.9.16
Status colour Red title Bugs Fixed an issue where the map wouldn't load on some UNI-GR1 devices.
Quality of life fixes.
Status title General Reduced boot-up time for the UNI-GR1.
Status colour Green title SURVEY Updated number of objects from 2000 to 500, that can be imported from DXF file import.
| Hiddenfragment macro | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
...
Version 2.9.13
Status colour Red title Bugs Small fixes to remove survey sync backend errors.
Fixed an issue where the mobile data page didn’t load if the UNI-GR1 was connected to a wifi network
Fixed an issue where duplicating an offseted point would not work and throw an error.
Quality of life fixes.
Status title General Reduced boot-up time for the UNI-GR1.
| Hiddenfragment macro | ||||
|---|---|---|---|---|
| ||||
|
...
Version 2.9.7
Status colour Red title Bugs Fixed an issue where some UNI-GR1s would report delayed positions.
| Hiddenfragment macro | ||||
|---|---|---|---|---|
| ||||
|
...
Version 2.9.6
Status colour Red title BUGS Fixed an issue where the tablet would sometimes not have internet via the hotspot of some UNI-GR1s when they were turned on.
Small fix when using the GP NMEA talker config
| Hiddenfragment macro | ||||
|---|---|---|---|---|
| ||||
|
...
Version 2.9.4
Status colour Red title BUGS Fixed an issue where some 4G external modems wouldn’t have internet and the UNI-GR1 would shutdown after 5 minutes.
Fixed some location settings UI issues when the base/rover mode settings aren’t configured properly.
| Hiddenfragment macro | ||||
|---|---|---|---|---|
| ||||
|
...
Version 2.9.2
Status colour Red title BUGS Fixed an issue where the tablet would sometimes not have internet via the hotspot of the UNI-GR1 when the UNI-GR1 was turned on.
...
Version 2.9.1
Status colour Red title BUGS Fixed an issue where the website link on how to use the 4G external modem wasn’t working for the Dutch language.
...
Version 2.9.0
Status title General Added a green spinning led animation to indicate when the UNI-Connect software is completely loaded after the power button is pressed.
Updated existing software functionality to improve battery life.
Added basic power saving functionality to reduce led brightness when below certain battery levels.
Added notification to the UNI-Connect dashboard to inform on how to use the 4G external modem with the UNI-GR1.
Added notification to the UNI-Connect dashboard to inform on installing the new coprocessor version.
Status colour Green title SURVEY Added functionality to the survey tool, to keep selected layers and labels hidden after stakeout is completed.
Status colour Purple title Wireless Added functionality to show 4G external modem information in the cellular page i when the modem is connected to the micro-usb of the UNI-GR1.
Added functionality to show the connection status of the sim inside the 4G external modem.
Added functionality to change and add new apn to the 4G external modem.
Added functionality to unlock a locked sim inserted in the 4G external modem.
Added notification to show if the sim inside the 4G external modem is locked and requires a PUK code.
Added functionality to reboot the dongle from the cellular page.
Added functionality to route internet from the 4G external modem to the hotspot of the UNI-GR1.
Updated existing functionality in the UNI-Connect software to allow connection with the 4G external modem.
Updated existing functionality in the marXact OS to allow connection with the 4G external modem.
Status colour Blue title UPDATE New coprocessor version (v1.42) added with power saving mode features and functionality to use the 4G external modem.
Status colour Yellow title ADVANCED Added functionality to factory reset 4G external modem.
Status colour Red title BUGS Fixed an issue where the fix mode led functionality wouldn’t change colors.
Fixed an issue where the very small z values would be stored in exponential form leading to sync errors.
Minor quality of life fixes.
| Hiddenfragment macro | ||||
|---|---|---|---|---|
| ||||
|
...
Version 2.8.22
Status colour Red title BUGS Fixed an issue where the the GPGST NMEA message would not be processed by the UNI-Connect software.
| Hiddenfragment macro | ||||
|---|---|---|---|---|
| ||||
|
...
Version 2.8.21
Status colour Red title BUGS Fixed an issue where the “geometric types” tooltip would cover the point geometric type selection on some safari browsers.
Status title General Added notification on the UNI-Connect dashboard with the link to order 4g marXact dongles.
NFC functionality will be off by default or when the UNI-GR1 turns on.
Updated NFC functionality to work only when Bluetooth discovery mode is enabled.
| Hiddenfragment macro | ||||
|---|---|---|---|---|
| ||||
|
...
Version 2.8.19
Status colour Red title BUGS Fixed an issue where newly drawn polygons would be drawn incorrectly when hiding and showing them consecutively.
Fixed an issue where the objects could not be recorded after resetting the survey database.
Fixed an issue where the syncing would only start after opening the projects pages.
Fixed an issue where the stakeout panel would not take the current project’s minimum position accuracy before saving or confirm a point.
Minor quality of life fixes.
Status title Genral Removed button to Erase all information and settings on the UNI-GR1.
Status colour Green title SURVEY Improved recording performance when recording polylines/polygons in the survey tool.
Major survey syncing performance improvements.
| Hiddenfragment macro | ||||
|---|---|---|---|---|
| ||||
|
...
Version 2.8.16
Status colour Red title BUGS Fixed an issue where the pole height was not taken into account when measuring lines and polygons.
Status title Genral Updated polyline and polygon map button colours.
Updated the general English and Dutch translations.
...
Version 2.8.15
Status colour Red title BUGS Fixed an issue where projects would be missing in the cloud when syncing survey data.
Minor quality of life fixes.
Status title Genral Updated functionality to use NMEA data for position and GNSS status information throughout UNI-Connect.
Default NMEA messages used by the UNI-GR1: GNGGA, GNGSV, GPGST, GPNTR, GPRMC.
Major performance improvements were made to the internal communication between the services used in the UNI-GR1.
Status colour Green title SURVEY Added a new column to show layer attribute values, when creating a new layer.
Updated stakeout panel to remain open after pressing the stakeout button.
Update stop record button functionality to reset the save layer option when recording a new point.
Added functionality to show real-time sync status (shows information regarding specific data being uploaded or downloaded from the cloud) in the projects overview page.
Added functionality to show cadastre (Dutch: Kadaster) layers for Belgium.
Added functionality to record objects using NMEA data.
Added notification when saving a project after editing.
Updated backend functionality when offsetting an object in Native GNSS/RTK provider coordinate reference system.
Removed PDOP and HDOP from the object panel.
Status colour Green title ADVANCED Updated reset GNSS functionality to re-initialize profile after the reset.
Added an option under the RTK/DGPS panel to set DGPS timeout.
| Hiddenfragment macro | ||||
|---|---|---|---|---|
| ||||
|
...
Version 2.8.5
Status colour Red title BUGS Temporary fix for a slow performance of the UNI-GR1. A permanent fix is coming soon.
...
Version 2.8.4
Status colour Red title BUGS Fixed an issue where the user could not enter X,Y coordinates when entering a manual point.
...
Version 2.8.3
Status colour Red title BUGS Fixed an issue where deleted layers would be shown when selecting a layer during an import.
Fixed an issue where the layers were not sorted alphabetically in the project view.
Fixed an issue where projects would be missing from the UNI-GR1 database and cause issues when syncing your survey data.
Updated some incorrect text strings.
Status colour Green title SURVEY Added a button and relevant functionality in the survey tool to stop recording a polyline/polygon.
Updated the project view functionality to have shape labels off by default.
Added a warning in the import panel to suggest using the import functionality in the cloud.
Added input validation when entering latitude, longitude, and height for a manual point, thereby only allowing correct latitude, longitude, and height values.
Added a button in the projects overview panel to pause/start syncing, thereby giving users more control over the sync durations.
Added a button to force a sync when the syncing is paused, thereby allowing the user to sync only when the button is pressed.
Added a checkbox and relevant functionality in the record panel to store layer information for future recorded points.
Status colour Yellow title Update Added functionality to show the radio version in the update panel.
| Hiddenfragment macro | ||||
|---|---|---|---|---|
| ||||
|
...
Version 2.7.29
Status colour Red title BUGS Fixed an issue where the data would not sync from the UNI-Cloud to UNI-GR1.
...
Version 2.7.28
Status colour Green title SURVEY Added functionality to clear the coordinate reference system selection fields with an “x“ icon.
Updated backend functionality to sync a limited amount of data from the UNI-GR1 to the UNI-Cloud to avoid timeouts.
Status colour Red title BUGS Fixed an issue the layers would contain the older format of colors when migrating.
| Hiddenfragment macro | ||||
|---|---|---|---|---|
| ||||
|
...
Version 2.7.27
Status title GENERAL Updated GPS name text to GNSS throughout the whole of UNI-Connect.
Status colour Green title SURVEY Added functionality to show layer attributes when selecting a layer to store or edit a shape.
Added functionality to permanently remove deleted survey data older than 30 days.
Added functionality to search coordinate reference systems when selecting them for new projects and importing.
Status colour Blue title Wireless Added feedback notification when saving a new wifi network.
Status colour Green title ADVANCED Added feedback to the wifi-advanced panel when saving country code.
Added feedback to the wifi-advanced panel when saving the wifi channel.
Added functionality to retrieve stored country code and wifi channel values.
Status colour Red title BUGS Fixed an issue where the layer attribute could not be edited when creating and editing a new layer.
Fixed an issue when storing a polyline point would give the wrong notification.
Fixed an issue when deleting an older point on shapes after extending the shapes created different shapes after refreshing the project.
Fixed an issue where imported points were not filtered.
Fixed an issue where the CSV export would show duplicate layer attributes per entry of a shape object.
Fixed an issue where exporting a project with '/' in the name would fail.
Fixed an issue to not include full file paths when downloading zipped RINEX files.
Fixed an issue where the UNI-Connect would roll back to an older version even if the older version was not present on the UNI-GR1.
Minor quality of life fixes.
| Hiddenfragment macro | ||
|---|---|---|
| ||
|
...
Version 2.7.22
Status colour Purple title Location Added option and functionality to support RTK corrections over a serial connection.
Added option and functionality to support RTK corrections over a USB connection.
Added functionality to support multiple baud rates for serial/USB correction input.
Updated location settings details page to show input type as USB/serial.
Updated all profile text to location settings in the UNI-Connect user interface.
Status colour Purple title Location-BASE Status colour Red title BETA Improved NTRIP caster functionality for base output.
Added functionality to support the UNI-NTRIP caster.
Added option to choose NTRIP version when entering NTRIP server details.
Status colour Blue title LOGGING Status colour Red title BETA Added option and functionality to log NMEA data (.txt file).
Added option and functionality to log RTCM3 data (.rtcm3 file).
Updated warnings when choosing different log types.
Update Raw log functionality and changed output file to .BIN.
Added functionality to convert Raw/RTCM3 files to RINEX files.
Added option to download Raw/RTCM3 files as RINEX files.
Added support for multiple RINEX download versions: 2.10, 2.11, 2.12, 3.00, 3.01, 3.02, 3.03, 3.04.
Added dialog-box to choose RINEX version when downloading Raw/RTCM3 files.
Show real-time updates for used SD-card space.
Added filter search bar for log files overview.
Added functionality to reset your profile after the logging process is finished or has stopped.
Status colour Green title SURVEY Set a maximum limit of 10000cm for minimum accuracy when creating project settings.
Updated functionality for the export dialog box to remain open until the export has finished.
Status title GENERAL Added support for more languages in UNI-Connect. In total, the supported languages are:
Arabic
Dutch
English
French
German
Greek
Hindi
Italian
Polish
Portuguese
Romanian
Russian
Spanish
Swedish
Turkish
Status colour Red title BUGS Fixed an issue where the manual checkbox would not remain checked when choosing a mount point.
Minor quality of life fixes.
...
Version 2.7.15
Status colour Purple title Location Added functionality to cancel when editing the location settings.
Released a new GNSS chip version (3.0.21614) for better RTK solution, RTCM decoding, and many more performance improvements.
Major performance improvements when working with location settings while surveying in the field.
Status colour Purple title Location-BASE Status colour Red title BETA Improved functionality for TCP connection between the base and the rover.
Major performance improvements for using UNI-GR1 as a base station.
Status colour Blue title LOGGING Status colour Red title BETA Updated and improved functionality to download large log files faster and more smoothly.
Added option to output RTCM messages to serial/USB.
Added functionality to show elapsed days during manual logging.
Status colour Green title SURVEY Added up to 4 decimals limiter for height/Z values.
Status colour Red title BUGS Fixed an issue where the location output would not be set on the then-most recent UNI-Connect version update.
Fixed an issue where downloading a large log file would fail.
Minor quality of life fixes.
...
Version 2.7.10
Status colour Purple title Location-BASE Status colour Red title BETA Added functionality to input manual DMS (Degrees, Minutes, and Seconds) for base location.
Added functionality to view in the location overview page the entered DMS (Degrees, Minutes, and Seconds) coordinates.
Status colour Blue title LOGGING Status colour Red title BETA Added a progress bar to show space used on the sd-card in real-time.
Updated the logging page layout.
Status colour Green title SURVEY Added a maximum length (128 characters) for the project name.
Status colour Red title BUGS Fixed an issue where the project wouldn’t load sometimes.
Minor quality of life fixes.
...
Version 2.7.6
Status colour Red title BUGS Squashed a bug where the CSV import would fail.
...
Version 2.7.5
Status colour Red title BUGS Squashed a bug where the NFC tag wouldn't load the location settings.
...
Version 2.7.4
Status colour Red title BUGS Squashed a bug where position data was not being sent via Bluetooth or serial, it now is.
...
Version 2.7.3
Status title GENERAL Upgraded the UNI-Connect interface for more security features that are updated regularly.
Status colour Purple title Location Added a location overview section to show the details of the currently selected location settings.
Added an option to get position correction data via the TCP host.
Added an edit page for the location settings.
Updated the existing location settings page and added more options.
(Beta)Status colour Purple title Location-BASE Added the static base functionality to the location settings. Thus, allowing to set UNI-GR1 as a base station out in the field.
Added an option to set a manual base coordinate position in the base station. These coordinates must be in line with the current position, as reported by the GNNS receiver.
Added an option to average base coordinate position (from 0-30 minutes), as received by the UNI-GR1 GNNS receiver, and set the result as the base coordinates.
Added an option to output base coordinate position via a TCP server (along with the IP address and port settings), those are running on the UNI-GR1.
Added an option to output the base coordinate position to an NTRIP caster.
Added an option to choose from different MSM types.
Added an option to choose and customize RTCM3 messages outputted via the base station.
(Beta)Status colour Blue title LOGGING Added functionality to log raw data to files. Currently, this only works when the UNI-GR1 is set to standalone and is not receiving any corrections.
Added functionality to log. You only need to set a manual time and determine pre-defined time limits.
Added functionality to view your project logs in the UNI-Connect interface.
Added functionality to download and delete log files from the UNI-Connect interface.
Added corresponding logging user interface changes, text string, and updates.
Status colour Green title SURVEY Added a loading icon, to indicate when a survey project is loading.
Status colour Yellow title Update Added a changelog button to the update page to show all version updates.
Status colour Red title bugs Squashed a bug where North, South, East, and West directions wouldn’t show properly.
Squashed bug where the migration alert would consistently popup.
Minor quality of life fixes.
...
Version 2.6.10
Status colour Blue title SURVEY Added functionality to view KLIC code data (synced from the UNI-Cloud) on the map in every project.
Added button to top-bar in the project view to import the KLIC code.
Added functionality to show and hide KLIC layers.
Improved performance when loading a large number of objects on the map.
Status colour Red title bugs Minor quality of life fixes.
...
Version 2.6.7
Status title GENERAL Removed addition of default layers when migrating to the UNI-GR1 database from the JSON structure.
Status colour Red title bugs Squashed a bug where deleted layers were not drawn on the map.
Squashed a bug where the layers were all gray when exporting a DXF file.
Squashed a bug where the default project could not be deleted.
...
Version 2.6.0
Status title GENERAL Moved profile menu from the side menu to Location under the Settings dropdown.
Updated functionality for better communication between the tablet and the UNI-GR1.
Updated internal UNI-GR1 messaging for faster and better communication between services.
Updated and optimized GNNS functionality on the UNI-GR1.
Improved translation functionality for better and optimized translation in the UNI-Connect user interface.
Major “under the hood” improvements for a more optimized and streamlined UNI-Connect.
Status colour Blue title Bluetooth Optimized the Bluetooth functionality.
Added Bluetooth blink functionality that turns the led ring blue automatically when transmitting data using Bluetooth.
Status colour Blue title WIRELESS Updated functionality for faster internet connectivity and faster loading of wifi networks.
Status colour Purple title SURVEY Moved UNI-GR1 data storage from the JSON file system to the UNI-GR1 database structure.
Added functionality to migrate current survey data to the UNI-GR1 database.
Updated every survey tool functionality to handle project data migrated to the UNI-GR1 database.
Added the database management service to the survey tool.
Added a synchronization service to sync data between UNI-Connect and the UNI-Cloud seamlessly.
Optimized survey tool to handle syncing from the UNI-Cloud and survey at the same time.
Added a cloud syncing icon to show when data is being synced from the cloud.
Added functionality to handle migrated and non-migrated projects in the survey tool.
Updated functionality to show newly added projects, layers, and project settings in the beginning.
Improved project strings for coordinate reference systems.
Added a button to show/hide all points in the objects overview panel.
Added a colour picker when selecting a specific colour for a layer more easy.
Project settings can be changed for existing and new projects. (Make sure the coordinate reference system is not different in the new assigned project setting)
If a project setting is attached to a project, it cannot be edited afterwards.
Added more notifications and warnings to the processes.
Status colour Green title ADVANCED Added an auto-shutdown option. This means that the UNI-GR1 automatically shuts down a pre-selected amount of seconds after turning the power off.
Status colour Red title bugs Minor bug fixes.
Quality of life fixes.
...
Version 2.4.14
Status colour Purple title GENERAL Added a Bluetooth led option.
Optimized Bluetooth functionality. Also, when data is being transmitted via Bluetooth the led ring turns blue automatically.
Status colour Blue title Update Improved UNI-Connect update functionality to avoid update failures.
Status colour Red title bugs Minor bug fixes
...
Version 2.4.6
Status colour Purple title SURVEY Selecting points/polylines/polygons are now easier to select in the project.
Added a stakeout button to stakeout polylines and polygon to reduce the number of steps.
Added a side shape button to create a side shape from a polyline and polygon.
Updated polygon and polyline extend functionality to extend from any section or any end of the selected shape to improve the surveying experience.
Added record time field in project settings to allow averaging of position when recording a point/polyline/polygon in a project, for an even more accurate result.
Added the EPSG 3794 coordinate reference system for Slovenia (to be verified).
Added the Transverse Mercator [Local Transformation] coordinate reference system for Curacao (to be verified).
Added the OSGB36 coordinate reference system for the United Kingdom (to be verified).
Added the Stereo 70 coordinate reference system for Romania (to be verified).
Added the ONGD17UTM39N/ONGD17UTM40N/ONGD17UTM41N coordinate reference systems for Oman (to be verified).
Added the UTM11N/UTM12N/UTM13N/UTM14N/UTM15N/UTM16N coordinate reference systems for Oman (to be verified).
Status colour Purple title ADVANCED Added a diagnostic tab with partial and complete tests to check device functionality via remote assistance with UNI-Support..
Status colour Red title bugs Cellular apn could not be changed without restarting.
Bluetooth devices list showing unidentified devices on discovery mode.
.dxf files would be exported at .txt files on Safari.
...
Version 2.3.11
Status title GENERAL Added a Reboot button.
Status colour Blue title WIFI Show local WiFi IP address.
Status colour Red title bugs The cellular modem could be unresponsive on boot, that is fixed.
...
Version 2.3.9
Status title GENERAL Added Bluetooth discovery mode for better pairing of Bluetooth
Status colour Purple title SURVEY Add UTM29N/UTM30N/UTM31N for United Kingdom (to be confirmed)
Backups for points/polylines and polygons
Status colour Blue title UPDATE Ability to Update GPS Firmware
Status colour Red title bugs Storing point in project other then default fails
Deleting polygon or polyline doesn't clear the project variable
Cannot import dxf file into RD with only polylines and polygons
Recording quickly in survey gives grid error message for some points
Cannot import default crs files to RD,Lambert etc
The project is set to exporting if export fails
Better error handeling for Survey saving of objects
Update grid error implementation in offset-line transformed
On device reset uniconnect version becomes none
On export to SD card cloud connection error notification is sent
The wifi icon stays cached on hard reset of the uniconnect
...
Version 2.2.21
Status title GENERAL Optimizing speeds in the UNI Backend
Status colour Purple title SURVEY Searchable dropdown for layers in recordpointpanel
WGS84/ UTM Zone 40 N AND Clarke 1880 for Oman
Status colour Blue title UPDATE Ability to Update Coprocessor Firmware
Status colour Red title bugs Export will say success even if connection to cloud, the actual upload, has failed
Offset lines only offsets native position
Do not create survey default profiles when SD-card is not inserted into the UNI-GR1
Recover some settings when lost
Polylines where Z value is not set fail to import with DXF importer
If sd card is not inserted on reboot after migration the projects are not shown
Factory reset can 'bricks' UNI-GR1
Survey app crashes if adding a point with incorrect coordinates
...
Version 2.2.9
Status title GENERAL Added fullscreen button in statusbar
Added page when connection to the UNI-GR1 backend is not succesfull
Status colour Red title CLOUD Added support number
Status colour Purple title SURVEY Undulation for importing objects
Show an error when point is outside of project CRS
Decrease precision for stakeout
Add name of point to csv export
Save staked out point
Add UTM32N for Germany (to be confirmed)
Status colour Blue title UPDATE Notify user when update is ready
Status colour Red title bugs CRS is sometimes not shown in projectinfo panel
When clicking new WiFi connection autofocus for password field is not working
On reboot the correct LED ring mode is not selected
Windows not creating serial ports when connected to the UNI-GR1 bluetooth
Kadastrale outlines is now working again
Minor bugfixes
...
Version 2.1.17
Status colour Purple title SURVEY Added support button to the uni-cloud page on the uni-connect
Added settings description to the setting section while creating a new project
Enabled Z-axis import on manual point creation
Added Australian coordinate reference system
Status title GENERAL Skipped versions due to bug fixes
General performance improvements
Status colour Red title bugs Fixed an issue when objects were not visible on recording or import if the projects coordinate reference system did not match that of the the current location / country.
Minor bug fixes
...
Version 2.1.9
Status colour Purple title SURVEY Migrated the survey tool projects to SD card
Added default settings, layers and project on first boot
Added functionality to create a virtual point (a.ka. create a point offset)
(beta) Added measurements report in PDF to be exported to the cloud
Added coordinate reference system for Suriname and Australia
Removed select all feature from projects list
Added a support button to the interface
Updated internal transform functionality to add more coordinate reference systems easily
Updated stakeout functionality
Updated manual point functionality
Status colour Purple title UPDATE New update system for easier update installations
Status title GENERAL Create separate list for project tracking for faster front-end
Increased optimization of the Survey app
Some UI fixes and changes
Skipped versions due to bug fixes
General stability improvements
Status colour Red title bugs Fixed an issue where the project list becomes empty
Added a confirm for deleting objects during survey
Minor bug fixes
...
Version 1.6.2
Status title GENERAL We are going so fast that we skipped a version!
General stability improvements
Status colour Red title bugs Fixed an issue when there was no position the NMEA-GGA message were still being sent to the NTRIP network
...
Version 1.6.0
Status colour Purple title SURVEY Change the record panel title on duplicating point
Status colour Purple title ADVANCED Add pin code to advanced page
Status colour Purple title UPDATE Updater is now ready to install a new operating system upgrade
Status colour Red title BUGS Add an informative message when extending a shape
Fixed an issue where side panel should remain in place
...
Version 1.5.9
Status colour Purple title Survey Change point to different layer
Connect/Add points to a existing polyline or polygon
Add reference lines to polyline or polygon
On project overview start with newest created project
New side panel for recorded object information
In project overview remove label and button for project export
Status colour Purple title UPDATE Prepare update mechanism for full operating system update
Status colour Red title Bugs Clicking the select all in project overview is now fixed
In bottom right area on survey map unable to move map
L1/L2 offset was shown in meters but said centimeters
...
Version 1.5.8
Status colour Purple title ADVANCED Device settings page for advanced GNSS settings
Status colour Red title Bugs Trailing whitespace in layername caused AutoCAD to not open DXF
On selecting output mode settings where not saved
...
Version 1.5.7
Status colour Purple title Survey Added Z value to DXF Polylines and Polygons
...
Version 1.5.6
Status colour Purple title Survey Added Z value to DXF Points/Blocks
Status colour Red title Bugs Disabled double clicking that starts 2 remote assistance sessions
...
Version 1.5.5
Status colour Purple title Cloud Remote assistance service to help the customer with the UNI-GR1 in the field
Status colour Purple title Survey Height now as text label in DXF
Status colour Red title Bugs If layer description empty csv export was missing point information
Small UI fix for the Survey topbar
...
Version 1.5.4
Status colour Red title Bugs Some small bug fixes
...
Version 1.5.3
Status colour Purple title Survey Some minor DXF improvements
PointID as text label in DXF
Export is now also in menu of a project
Show/Hide button for point labels
Show layer color in layer popup
Status colour Red title Bugs Survey stakeout bubble fix
...
Version 1.5.2
Status colour Red title Bugs Survey distance was calculated wrong, so it was not accurate enough
...
Version 1.5.1
Status colour Red title Bugs Coordinate Reference System was not showing on survey info and settings
...
Version 1.5.0
Status colour Purple title General Fully translated UNI-Connect to Dutch
Status colour Purple title Survey Remove zoom on point recording
New projects can now be created in RD(Netherlands, RDNAPTRANS2018), Lambert72(Belgium) or Lambert08(Belgium)
Projects can now be exported in as RD, Lambert72 or Lambert08
Files in RD, Lambert72 or Lambert08 can now be imported
Status colour Red title Bugs On some phones selectbox didn’t show any text
Survey status bar was not fixed so it could move up behind the UNI-Connect status bar
Uploading to UNI-Cloud sometimes failed, timeout is increased
...
Version 1.4.3
Status colour Red title Bugs Small fixes
...
Version 1.4.0
Status colour Purple title Profile Add internal output mode for faster position update in UNI-Connect
Status colour Red title Bugs Change the way Fix and Float solutions are calculated
On exporting imported points some data was missing
...
Version 1.3.6
Status colour Purple title Profile Added Rover Static Mode
...
Version 1.3.5
Status colour Purple title Survey Stakeout points
Stakeout points within 50cm of the point show panel with circles
Seismic Survey
CSV Import
Remember layer on saving a point
Optional name to points, polylines and polygons
Status colour Red title Bugs Timeout could cause the UNI to disconnect from the UNI-Cloud
Close button in Survey Settings would not close the panel
...
Version 1.3.4
Status colour Red title Bugs Invisible New Project button on mobile devices
...
Version 1.3.3
Status colour Purple title Survey Push project exports to the UNI-Cloud
Change objects overview to support polylines and polygons
...
Version 1.3.2
Status colour Purple title Survey Record Polylines
Measure length of polylines
Record Polygons
Measure square meters of polygons
...
Version 1.3.1
Status colour Red title Bugs On startup doesn’t connect to RTK network
...
Version 1.3.0
Status colour Purple title Dashboard Add baseline information to RTK panel
Status colour Purple title Survey Status colour Red title Beta Create Layers, Projects, Settings
Record Points on map
Show points on map
Export to CSV
Status colour Purple title Improvements Get DOP value from NMEA GNGSA sentence
When sharing Mobile data with connected clients the connection is not dropped
...
Version 1.2.5
Status colour Purple title Improvements Changed the complete layout of the dashboard
Status colour Red title Bug Fixes Fixed an issue where the UNI-Cloud connection is not removed after a full reset
...
Version 1.2.4
Status colour Red title Bug Fixes Fixed an issue where the LED Ring does not go to the old value after confirmation
...
Version 1.2.3
Status colour Purple title Update Update for GPS module need to be installed manually by the customer
Status colour Purple title Improvements Add more temperature detections
Status colour Red title Bug Fixes Fixed an issue when the UNI-GR1 rebooted when the LED Ring value was Fix Level
...
Version 1.2.2
Status colour Red title Bug Fixes Fix minor bug realted to outputting NMEA data.
...
Version 1.2.1
Status colour Purple title Dashboard Added Elevation data from the IMU
Changed titles to bold for better reading
Status colour Purple title Profile Changed some icons for clarification
You can now switch profiles when having multiple UNI-Cloud profiles
Status colour Purple title Settings General:
Added Device State
Added PCB Number
Added Hardware Addresses
Added Hostname
Added Version information
Changed IMSI to ICCID to show Mobile SIM number
Led:
Added “Fix Level” mode, this changed the LED Ring color based on Solution Status
SINGLE: Purple
FLOAT: Blue
FIX: Green
Bluetooth:
Added Information
Added Paired Bluetooth Device Status
Hotspot:
Status colour Red title New Connected Clients to the Hotspot of the UNI-GR1
Mobile Data:
When saving Pincode this is now stored on the UNI-GR1 even after a reboot
Added Predefined APN settings
Wi-Fi:
After wrong password you are still able to connect to the same or other accesspoints
Added Known Networks
Able to delete Know Network
UNI-Cloud:
Status colour Red title New Added Connection Status to the UNI-Cloud
You will be able to reconnect to the UNI-Cloud if something is wrong
Update:
Status colour Red title New Added Check fro update button
Show all current versions
Show available versions
Manual download and install updates
Status colour Purple title Status Bar Bluetooth Connection Status
Cloud Connection Status is Now based on real Cloud connection
Correction Input added
Network Status shows more information
Mobile Data status
WiFi Status
Solution Status added
Status colour Purple title Other Related features Moved all calls from Frontend to Backend to WebSockets for Real-Time Data
Faster overall experience in UNI-Connect Frontend
Connection LED now has the right status
Satellite LED now has the right status
Data LED now has the right status
Updates are much smaller for frequent updates
Minor Features
Status colour Red title Bugs From Mobile data to WiFi connection without issues
Minor Bugs
...
Version 1.1.0
Status colour Purple title Dashboard Added Signal to Noise Ratio
Status colour Purple title Survey Status title Coming Soon Status colour Purple title Logging Status title Coming Soon Status colour Purple title Profile Added Serial Position Output option
Added Micro-USB Position Output option
Added NMEA Mix&Match for custom NMEA output
Status colour Purple title Settings Splitted menu to improve loading times
Status colour Purple title Status Bar Status colour Red title new Added Cloud Connection Status
Added Hotspot Status
Added Network Status shows more information
Mobile Data status
WiFi Status
Added Solution Status
Added Battery Status
...
Version 1.0.0
Status colour Purple title Dashboard Location information (Position, Deviation, Tracked/Used Satellites, Solution Age)
Speed information (Horizontal, Vertical)
Solution Status
Positioning Mode
RTK information (Age of Differential Data)
Status colour Purple title Profile Rover/Base Mode (Only Rover Mode is Enabled)
Standalone/DGPS/RTK Modes
On DGPS/RTK Mode the ability to insert NTRIP Settings
Bluetooth Output
Status colour Purple title Settings General Information(Name, Model, Serial, IMEI, IMSI)
Bluetooth:
Show Paired Bluetooth Devices
Remove Paired Bluetooth Device
Cellular:
Insert Pincode on SIM locked
Insert APN Settings
Led:
Change LED Ring operating mode
WiFi:
Show Available WiFi Networks
Connect to available WiFi Network
Disconnect from WiFi Network
Remove Connected WiFi Network
Status colour Yellow title Other Related features Reset by holding the powerbutton for longer then 30 seconds
Load default profile from user by holding the NFC tag
Trun on connection LED
Turn on satellite LED